Duraco

PAGE LOADING

Our Products

Sub Products

About Water

Water is essential for health, be it for the environment or for the individual. The Duraco water systems will grant you peace of mind and spare you from water shortage, particularly during the dry times in Mauritius, through optimal water management.

Products Details

  • 450lts - suitable for 2 persons
    450_Lts
  • 900lts - suitable for 4 persons
    900_Lts
  • 1200lts - suitable for 6 persons
    1200_Lts
  • 2000lts - suitable for 10 persons
    2000_Lts


Installation of Water Tanks:

  • Water Tanks should NOT be installed on:

    (i) Rocky and Uneven Surfaces

    (ii) Block and Metal Frames.

Best installation practice is to place your tank on a flat, smooth and even surface.

  • Outlet should be well supported (as shown below), to avoid the risk of leakage and damage to the water tank at Outlet.

NOTE: These water tanks are NOT designed to be installed as underground water tanks. For underground installation, a retaining wall is COMPULSORY (see design below)

Contact our Expert for more info.

Tank Plumbing

Your tank should be installed by a qualified plumber in accordance with regulations, ensuring piping and fittings are correctly done to avoid you any further issues with your tank.

Pedrollo Water Pumps

Pedrollo water pumps offer the most efficient and reliable method of delivering water from your Duraco Water tank. Contact us for a proposal.

Water Level Indicator

Our water level indicator facilitates the monitoring of water level without hassle.

Features

Quick and easy to install, seals directly to the tank – DIY product

Maintenance free - no batteries or wiring required

Suitable for existing and new tanks up to 3.0 metres high

Easy to read dial face with ‘Empty’ and ‘Full’ indicators

Requires a standard 32mm hole saw

UV resistant

Utilises a reliable float system

Installation Guideline

Before installing your level indicator, it is important to calibrate it for use (adjust the indicator as per tank height).

Calibration

  1. Carefully remove the front clear face from the Tank Gauge to enable access to the moveable Empty and Full indicators.
  2. Select an installation site on your tank for the Tank Gauge and mark it. It is preferable that this is a flat area and that once installed, will allow you to view the Tank Gauge face easily.
  3. Whilst maintaining the same height and keeping the weight outside of the tank, extend the weight so it is level with the bottom of your tank. Move the red Empty indicator to where the water level indicator is pointing.
  4. Lift the weight so it is level with the overflow on your tank and move the green Full indicator to where the water level indicator is pointing.
  5. Tank Gauge is now calibrated. Replace the front clear face.

Installing

  1. Drill a 32mm hole into your tank at the previously marked installation site.
  2. Lower the weight through this hole and sit the Tank Gauge on your tank.
  3. Using the supplied screws secure the Tank Gauge to your tank.
  4. Your Tank Gauge is now installed and ready for use.

Note: Installation done by Duraco

Warranty Period

The Warranty is valid for Twelve years

The warranty applicable to your Duraco water tank is as follows:

First 4 years – Free replacement or free repair whichever may be necessary
5 to 6 years – 85% discount off the current retail price of the water tank or free repair,
whichever may be necessary
6 to 8 years – 70% discount off the current retail price of the water tank or free repair,
whichever may be necessary
8 to 10 years – 55% discount off the current retail price of the water tank or free repair,
whichever may be necessary
10 to 12 years – 40% discount off the current retail price of the water tank or free repair,
whichever may be necessary

Note:
The company’s obligations under this warranty is limited to repair or replacement of the water
tank, at the option of the company

Warranty Exclusions

  1. Accidental damage; acts of god; failure due to misuse; incorrect installation; attempts to repair the water tank other than by DURACO Ltée accredited service agent
  2. The warranty only applies to the water tank and does not cover any plumbing, or fittings supplied by the company such as float valve, outlet fittings, foot valve in case of underground tanks and lid
  3. Any leakage at outlet/inlet resulting from wrong plumbing installation
  4. Subject to any statutory provisions to the contrary, claims for damage to furniture,carpets, foundations or any other consequential loss either directly or indirectly due to leakage from the water tanks
  5. The warranty does not apply to tanks which have been used for storage of chemicals
  6. Where the water tank is not installed according to the instruction below

Installation instructions

Aboveground tanks

  1. All water tanks must be anchored on a smooth flat surface
  2. No external load should be applied to the tanks
  3. Inlet and outlet pipes should be adequately supported to avoid strain on the water tanks 

Underground tanks

  1. All underground tanks must be installed on flat concrete base and protected by a retaining wall to avoid any external pressure
  2. No external load should be applied to the tanks
  3. Inlet and outlet pipes should be adequately supported to avoid strain on the water tanks