Duraco

PAGE LOADING

Our Products

Sub Products

About Energy

Energy collected from the sun is the cleanest and most sustainable source of energy we know. Its use relieves us from the consumption of exhaustible fossil fuels and does not pollute while reducing considerably the emission of carbon dioxide.

Products Details

Panels

 Our PV Panels are of 310 Watts capacity as referred in the On grid section. Based on the regions and the load being used, our Engineers will design and calculate the Quantity of panels required to meet the site requirement.

MPPT Charge Controller

WRM are the solar charge controllers of the western series with MPP Tracking. They can be used either in small or big systems for domestic and industrial use and for telecommunication systems. They control the current of PV modules with PWM recharge and the battery discharge disconnecting the charge in case of deep discharge of the battery. Different configurations are possible: load always on, load on only during the day, load on only during the night, load on only during the night that can be programmed for a total number of hours from 1 to 16.

Features:

  • MPPT (Maximum Power Point Tracking) Algorithm – Enables efficient transfer of energy from cells to the Inverter
  • LCD Graphic display
  • Light Sensor Function to optimize energy conversion

Specifications:

  • Ampere – 15A
  • DC Voltage – 12/24 Vdc

 

Off Grid Inverter

Leonardo Series – Made in Italy

Leonardo Inverter Series are integrated inverters able to manage, control and complete different sources of renewable energy: Photovoltaic and Wind with accumulation and storage so to provide for the energy needs of households.

Leonardo Inverter Series provide for the immediate use of Energy produced by solar panels or wind turbines for the power supplying of households, by transforming the energy that is produced by renewable energies into 230V 50Hz alternated voltage as for the public distribution grid.

Electric Features and Specifications

 

Specifications

Leornardo
1500

Leonardo
2000

Leonardo
3000

Leornardo
4000

Leonardo
5000

INVERTER

Output Power, Pout

1500 Watts

2000 Watts

3000 Watts

4000 Watts

5000

Watts

 

Output Voltage, Vac

230V

230V

230V

230V

230V

 

Output Frequency, Fac

50 Hz

50 Hz

50 Hz

50 Hz

50 Hz

 

Harmonic Distortion, THD

< 3%

< 3%

< 3%

< 3%

< 3%

Battery Systems for storage

Batteries in solar applications have to meet the demands of unstable grid energy, heavy cycling (charging and discharging) and irregular full recharging. There’s a variety of battery types fitted for these unique requirements. Considerations for choosing a battery include cost, cycle life and installation and maintenance as per table below:

 

Features

AGM/Gel Batteries

Lithium Ion Batteries

Storage Capacity

(Ampere-Hours)

  • To be sized as per the Load and days of Autonomy
  • Voltage – 12V/24V
  • To be sized as per the Load and days of Autonomy
  • Voltage – 12 V/24V

Cycling

  • Provide lower cycles in their Lifetime
  • Low Charge and Discharge Efficiencies
  • Deliver more Cycles in their Lifetime
  • High Charge and Discharge Efficiencies

Replacement/Maintenance

  • AGM and Gel Technologies are maintenance free
  • Maintenance Free

For sizing of your off grid kit, kindly contact our technical team for an onsite survey and tailor made proposal.